Avtonom simsiz bosim uzatgichi ROSSMA IIOT-AMS P-METER
Yangi avtonom simsiz bosim uzatgichi IIOT-AMS P-METER, Sanoat Internet of Things (IIoT) va avtomatlashtirilgan texnologik jarayonlarni boshqarish tizimlari (ATJBT) ga integratsiya qilish uchun mo'ljallangan.
Ko'rib chiqish
Imkoniyatlar
Qurilmaning asosiy xususiyati — o’rnatilgan simsiz aloqa moduli bo’lib, u o’lchangan bosim ma’lumotlarini kabel o’tkazmasdan ma’lumot yig’ish va monitoring tizimlariga uzatishni ta’minlaydi.
BOSIM MONITORING REJIMI:
- Fon monitoringi: har 5 sekundda (sozlanadi) qisman uyg’onish bosimni belgilangan qiymatlar bilan solishtirish uchun; agar diapazon ichida bo’lsa — ma’lumot uzatmasdan uyqu rejimiga qaytish
- Favqulodda uzatish: bosim belgilangan qiymatlardan oshganda darhol ma’lumot uzatish
- Rejalashtirilgan aloqa: o’lchash va ma’lumot uzatish bilan to’liq uyg’onish (standart har 15 daqiqada)
| Parametr | ROSSMA IIOT-AMS ANALOG 4-20 mA + Metran | ROSSMA IIOT-AMS P-METER EX |
| Portlashdan himoya | 1Ex e IIC T4 Gb, IP66 | 1Ex db IIC T5 Gb X / PB Ex db I Mb X, IP66 |
| Bosim diapazoni | Datchik bilan belgilanadi | 0…7 / 20 / 35 / 70 MPa |
| Ish harorati diapazoni | –55…+85°C | –55…+85°C |
| O’lchash vaqti (oddiy rejim) | 5-10 sek (datchik isitish) | 2 sekunddan ko’p emas |
| O’lchash vaqti (monitoring) | 3–5 sek | 2 sek / 0.5 sek (tezkor) |
| O’lchash paytida quvvat sarfi | 40–200 mA | 10 mA (4–20 marta kam) |
| LoRa uzatish rejimidagi tok | 100 mA (1 sek gacha) | 100 mA (1 sek gacha) |
| Nisbiy xatolik | 1.5% | 0.2% (7.5 marta aniqroq) |
| Batareya muddati 14 Ah (monitoringsiz) | 40K o’lchash | 220K (5.5 marta ko’proq) |
| Batareya muddati 14 Ah (monitoring bilan) | 50K o’lchash | >1M (20 marta ko’proq) |
| Batareya muddati 15 daqiqa oraliqda | ~13 oy | 76 oy (~6 yil) (6 marta uzoqroq) |
| Batareya muddati monitoring bilan (tezkor o’lchash 1/min) | Tavsiya etilmaydi | 40 oy (~3.3 yil) (noyob xususiyat) |
* Haqiqiy qiymatlar sozlamalar va ish sharoitlariga bog’liq.
ROSSMA IIOT-AMS P-METER EX ning asosiy afzalliklari:
⚡ 20 marta ko’proq o’lchash • 🎯 7.5 marta yuqori aniqlik • 🔋 6 yilgacha uzoqroq batareya muddati
1Ex db IIC T5 Gb X / PB Ex db I Mb X
Avtonom 10 yilgacha
Hujjatlar
Foydalanish bo'yicha qo'llanma Wiki-da ochish ↗
A wireless pressure transducer designed for automatic monitoring, control, and management of industrial processes. It converts gauge pressure into a digital signal and transmits encrypted data packets over a LoRaWAN wireless network.
Fig. ROSSMA IIOT-AMS P-METER Ex — autonomous wireless pressure transducer
Purpose
P-METER Ex is a specialized autonomous device for continuous pressure monitoring in industrial environments. Unlike universal ANALOG meter-switches, P-METER Ex features a built-in high-precision strain gauge pressure sensor made of 316L stainless steel and is optimized for minimal power consumption during pressure measurement.
Applications:
- Oil and gas industry — pipeline and wellhead pressure monitoring
- Water supply and sewerage — network pressure control
- District heating — coolant pressure monitoring
- Industrial automation — process control
- Mining industry — hydraulic system monitoring
Explosion protection: Marking 1Ex db IIC T5 Gb X / PB Ex db I Mb X — the device is designed for use in hazardous areas. Protection rating IP66.
Certificate of conformity TR CU 012/2011: EAEU RU C-RU.АЯ45.В.00306/25 (valid until 02.12.2030).
Technical Specifications
Metrological Characteristics
| Parameter | Value |
|---|---|
| Measurement ranges | 0–7 / 0–10 / 0–20 / 0–35 / 0–70 MPa |
| Basic accuracy | ±0.2% |
| Calibration interval | 3 years |
| Measurement time (standard mode) | ≤2 sec |
| Measurement time (fast mode) | 0.5 sec |
Operating Conditions
| Parameter | Value |
|---|---|
| Media temperature | -40…+125°C |
| Operating temperature range | -55…+80°C |
| Relative humidity | up to 98% |
| Protection rating | IP66 |
| Explosion protection marking | 1Ex db IIC T5 Gb X / PB Ex db I Mb X |
Power Supply and Reliability
| Parameter | Value |
|---|---|
| Power supply | Built-in 3.6 V battery |
| Current consumption during measurement | 10 mA |
| Battery lifespan | up to 10 years |
| Battery life (without monitoring) | 220,000 measurements |
| Battery life (with monitoring) | >1,000,000 measurements |
| Device service life | at least 20 years |
| MTBF | 180,000 hours |
| Built-in non-volatile memory | yes |
Design
| Parameter | Value |
|---|---|
| Housing dimensions | 260 × 130 × 70 mm |
| Weight | ≤1.5 kg |
| Housing material | ADC12 alloy |
| Strain gauge material | 316L stainless steel |
LoRaWAN Specifications
| Parameter | Value |
|---|---|
| Device class | A |
| Communication range | up to 5 km (urban) / up to 15 km (rural) |
| Frequency plan | RU-868 |
| Data encryption | AES-128 |
| Remote configuration | yes |
Transmitted Data
Each communication session transmits:
| Parameter | Description |
|---|---|
| Pressure | Current pressure value (MPa) |
| Timestamp | Time of measurement |
| Temperature | Built-in temperature sensor reading |
| Battery voltage | Battery charge level |
Operating Modes
P-METER Ex supports an intelligent pressure monitoring mode optimized for maximum battery life:
1. Background Pressure Monitoring
Partial wake-up every 5 seconds (configurable) to compare current pressure against set thresholds. If pressure is within normal range — return to sleep mode without data transmission. This ensures continuous monitoring with minimal power consumption.
2. Alarm Transmission
Immediate data transmission to the server when pressure exceeds configured thresholds (upper/lower limit). Provides instant response to emergency situations.
3. Scheduled Communication
Full wake-up with measurement and data transmission on schedule. Default interval — every 15 minutes (configurable).
Background monitoring is a unique feature of P-METER Ex. The device checks pressure every 5 seconds but only transmits data when necessary. This enables a battery life exceeding 1,000,000 measurements.
Battery Life
Estimated autonomy (14 Ah battery)
| Mode | Autonomy |
|---|---|
| 15-minute transmission interval (no monitoring) | 76 months (~6 years) |
| Monitoring + fast measurement 1/min | 40 months (~3.3 years) |
WARNING: The device is equipped with a non-rechargeable lithium-thionyl chloride (LiSOCl₂) battery. Attempting to recharge the battery may cause a fire!
🧮 Battery Life Calculator
Battery Life
Comparison with ANALOG + Metran Solution
| Parameter | ANALOG 4-20 mA + Metran | P-METER Ex |
|---|---|---|
| Explosion protection | 1Ex e IIC T4 Gb, IP66 | 1Ex db IIC T5 Gb X, IP66 |
| Pressure range | Determined by sensor | 0–7 / 0–20 / 0–35 / 0–70 MPa |
| Operating temperature | -55…+85°C | -55…+85°C |
| Measurement time (standard) | 5–10 sec (sensor warm-up) | ≤2 sec |
| Measurement time (monitoring) | 3–5 sec | 2 sec / 0.5 sec (fast) |
| Current consumption | 40–200 mA | 10 mA (4–20× lower) |
| Accuracy | 1.5% | 0.2% (7.5× better) |
| Battery life 14 Ah (no monitoring) | 40K measurements | 220K (5.5× more) |
| Battery life 14 Ah (with monitoring) | 50K measurements | >1M (20× more) |
| Autonomy (15-min interval) | ~13 months | 76 months (~6 years, 6× longer) |
| Pressure monitoring 1/min | Not recommended | 40 months (~3.3 years) |
* Actual values depend on settings and operating conditions.
Key Advantages
- 20× more measurements — battery life >1,000,000 measurements with monitoring
- 7.5× better accuracy — ±0.2% vs 1.5%
- Up to 6 years of autonomous operation — 76 months at 15-min interval
- Built-in strain gauge — 316L stainless steel, no external sensor required
- Minimal power consumption — measurement current only 10 mA
- Background pressure monitoring — checks every 5 sec without battery drain for transmission
- db-level explosion protection — approved for mining operations (PB Ex db I Mb X)
- 3-year calibration interval — reduced metrological maintenance costs
Software Protection
Metrologically significant software is protected by hardware — "electronic sealing" technology. Protection level — "high" per R 50.2.077–2014.
This prevents unauthorized modification of metrologically significant device parameters.
Additional Information
- Battery Replacement — battery replacement guide
- Communication Protocols — control commands and data formats
- ROSSMA Configurator — device configuration
- Troubleshooting — diagnostics and problem solving
Related Pages
- Device Catalog — all ROSSMA IIoT-AMS devices
- System Architecture — ROSSMA network components
- LoRaWAN Technology — protocol description
ROSSMA® IIOT-AMS P-Meter Ex LoRaWAN ma’lumotlarni uzatish bilan simsiz bosim uzatgichi
Bosim uzatgichi avtomatik monitoring, tartibga solish va texnologik jarayonlarni boshqarish tizimlarida foydalanish uchun mo’ljallangan. U ortiqcha bosimni raqamli signalga aylantiradi va shifrlangan ma’lumot paketlarini simsiz tarmoq orqali uzatadi.
METROLOGIK XARAKTERISTIKALAR:
- O’lchash diapazoni: 0–7 / 0–10 / 0–20 / 0–35 / 0–70 MPa
- Asosiy keltirilgan xatolik: ±0.2%
- Kalibrlash oralig’i: 3 yil
- O’lchash vaqti: 2 sekunddan ko’p emas
ISH SHAROITLARI:
- O’lchanadigan muhit harorati: -40…+125°C
- Ish harorati diapazoni: -55…+80°C
- Nisbiy namlik: 98% gacha
- Himoya darajasi: IP66
- Portlashdan himoya belgisi: 1Ex db IIC T5 Gb X / PB Ex db I Mb X
QUVVAT VA ISHONCHLILIK:
- Quvvat kuchlanishi: o’rnatilgan 3.6 V batareya
- Batareya ishlash muddati: 10 yilgacha
- Qurilma xizmat muddati: kamida 20 yil
- Nosozliklar orasidagi o’rtacha vaqt: 180 000 soat
- O’rnatilgan doimiy xotira: ha
LoRaWAN TEXNIK XUSUSIYATLARI:
- LoRaWAN® qurilma sinfi: A
- Radio aloqa masofasi: shahar sharoitida 5 km gacha; qishloq sharoitida 15 km gacha
- Chastota rejasi: RU-868
- Masofadan sozlash: ha
- Ma’lumotlarni shifrlash: AES-128
KONSTRUKSIYA:
- Korpus o’lchamlari, mm: 260×130×70
- Og’irlik: 1.5 kg dan ko’p emas
- Korpus materiali: ADC12 qotishmasi
- Tenzodatchik materiali: 316L zanglamaydigan po’lat
DASTURIY HIMOYA:
- Metrologik ahamiyatga ega dasturiy ta’minot apparat vositalar bilan himoyalangan (“elektron plomba”)
- Himoya darajasi: R 50.2.077–2014 bo’yicha “yuqori”
Dasturiy ta'minot
ROSSMA® IIOT-AMS kommutatsiya qurilmalarini masofadan sozlash uchun konfigurator ilovasi