Tilt_Counter_main_picture
Autonomous Measuring and Switching Device ROSSMA® IIOT-AMS TILT COUNTER Ex (Tilt Counter)
The ROSSMA IIOT-AMS Tilt Counter registers housing tilt at angles greater than 15 degrees and counts tilts. The device operates autonomously and provides wireless data transmission via LoRaWAN or NB-IoT.
Overview
Features
The device is supplied with a 3.6V battery.
The ROSSMA IIOT-AMS TILT COUNTER battery is a built-in battery with capacity of 1200/6000/9000/14000/19000/20000 mAh, designed for up to 10 years of service with daily readings and data transmission.
Tilt counting and accumulation is performed continuously. Data packet transmission occurs over wireless network with a period from 1 minute (setting the interval below 1 minute is not recommended to ensure long autonomous operation). Read values are stored in the device memory.
Data transmission period is configurable via wireless network commands. The factory default is 1 transmission per 15 minutes. Data transmission occurs on a timer stored in the device internal memory.
The device operates from a built-in 3.6V battery. The 20 Ah battery capacity is designed for 10 years of service.
With the “Request confirmation” parameter disabled, the device sends current data to the network at the configured interval. There is no packet delivery verification in this mode. No undelivered packets remain in the device memory.
Device communication timing is controlled via the LoRaWAN network server and can be adjusted by command.
GENERAL TECHNICAL SPECIFICATIONS:
- Operating temperature range t,°С: -55…+85
- Built-in temperature sensor: yes (sent with each communication)
- Antenna type: internal
- Supply voltage: built-in 3.6V battery, 20 Ah capacity, D-size.
- Built-in battery charge measurement: yes (sent with each communication)
- Housing dimensions, mm: 75×70×55
- Mounting: directly to sensor, cable ties to pole, DIN rail, wall
LoRaWAN TECHNICAL SPECIFICATIONS:
- LoRaWAN® device class: A
- LoRaWAN® activation: OTAA/ABP (configurable), ABP – default
- Transmitter output power: up to 100 mW (configurable), 25 mW default
- Sensitivity: -138 dBm
- Radio range: up to 5 km urban; up to 15 km rural.
- Frequency plan: RU868, EU868, IN865, AS923, AU915, KR920, US915, KZ865, custom§ (based on EU868) – configurable.
NB-IoT TECHNICAL SPECIFICATIONS:
- Data rate: 25/20 kbps (single–tone) or 60 kbps (multi–tone) (DL/UL)
- RF bands: B1/2/3/5/8/12/13/17/18/19/20/25/26/28/66/70
1ExeIICT4 Gb, IP66
Autonomous up to 10 years
Documentation
Works with the following sensors:
Designed for use with devices and mechanisms where it is necessary to monitor the presence of rocking (tilting) of moving parts.
It contains two sensitive elements for tilt detection.
The device can be used at industrial facilities, municipal infrastructure, and hard-to-reach locations (manholes, basements). The device can be installed in locations without power supply and operates in harsh climatic and weather conditions.
The equipment is registered in the Registry of the Ministry of Industry and Trade of the Russian Federation as equipment manufactured in the Russian Federation (Certificate 48859/11 dated 11.06.2021).